You’ll save hundreds of dollars and have a great time building this stunning coffee from easy to use plans. The step-by-step instructions along with color pictures will help you build this coffee table in a day or two. The finished result will get you this coffee table that has tons of room for baskets or ottomans below. When you cut the legs, double-check that the length is a good fit for your dining-room chairs, especially if any of them have arms. Clamp the legs to the apron, but add a ⅛-inch piece of wood to the front as a spacer (fig.

When you cut the half-lap joints on the short stretcher, set the saw’s depth to 1⅜ inches deep. Drive a 2½-inch coarse-thread pocket through the leg into the stretcher to lock the pieces together.

Use a doweling jig to bore holes in the ends of the tabletop and on one side of each breadboard piece. As you finish, support the waste piece so it doesn’t break away unevenly and give you a jagged edge. When you cut the half-lap joints on the short stretcher, set the saw’s depth to 1⅜ inches deep. Use a doweling jig to bore holes in the ends of the tabletop and on one side of each breadboard piece. As you finish, support the waste piece so it doesn’t break away unevenly and give you a jagged edge.

Dimensionality. Spread glue

ana white x free coffee table plans image

You’ll find diagrams, building directions, photos, and more all included in this free coffee table plan. If you love this free coffee table plan, you’re in luck because there are also plans here for a matching end table and console.

The finished product will result in a modern looking coffee table that can be rolled wherever you need it. The free coffee table plan includes photos, diagrams, and step-by-step building instructions.

You’ll find blueprints, cutting list, list, and all the instructions you need in this free coffee table plan. Bore two holes for pocket screws into each side of the apron’s back, four in total (fig. This will offset the face of the apron from the face of the leg, pushing it back a bit and creating a nice dimensionality.

Spread glue on the notched face of the short stretcher and the notched face of the leg, and press the pieces together. Bore four pocket-screw holes through the bottom faces of the top pieces, then spread glue on each adjoining edge.

On that note, you can give up your coasters—a little wear will only make your table look better. This will offset the face of the apron from the face of the leg, pushing it back a bit and creating a nice dimensionality.

Spread glue on the notched face of the short stretcher and the notched face of the leg, and press the pieces together. On that note, you can give up your coasters—a little wear will only make your table look better.

Source: https://www.thebalance.com/free-coffee-table-plans-1357114